Fire Essential's 76mm Euro Profile Stainless Steel Sashlocks with Intumescent Pads and 70mm Euro Profile Cylinder and Thumb Turn are essential for any stainless steel hardware designs that are fitted into bathrooms and other areas that require that extra bit of privacy. Man... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreFire Essential's 76mm Euro Profile Stainless Steel Sashlocks with Intumescent Pads and 70mm Euro Profile Cylinder and Thumb Turn are essential for any stainless steel hardware designs that are fitted into bathrooms and other areas that require that extra bit of privacy.
Many fire-rated ironmongery products require intumescent to be fitted as standard (to validate the Certifire certification).|To install, fit one pad under each hinge leaf for FD30 and two under each leaf for FD60.|It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. When the hinges shown as being CE Marked are included in a fire-resisting test they are fitted to the door and frame with intumescent pads under each leaf.
You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. To install, fit one pad under each hinge leaf for FD30 and two under each leaf for FD60.|Certifire is a Third-Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
1 x 76mm BS Euro Profile Sashlock (SS)|1 x 75mm x 105mm Universal BS Intumescent kit to suit 76mm sashlock lock with backset and strike plate|1 x 70mm Euro Profile Cylinder with Thumb Turn
Question:
Ref Lock L1C1 i see it is fire rated. My insurance had me change my locks to 5 lever mortice kite Marked as it is a shop.I now have to change these to thumb turn re the fire requirements.Would these meet the same standard and could you advise please' Regards Dudley Long
Answer:
The Sashlock and Cylinder in this pack are CE marked, tested to BS EN 12209:2003 etc.
You can download the fire certificate from the page link below:
fireessentials.co.uk278489-1665131010-724933058
Fire Essentials Door Products - Fire Documents, Technical Downloads & Product Support
This will give you all the specifications for the hardware and the intumescent material.
Question:
Does this lock fit a slimline 35 mm thick fire door?
Answer:
While we can not comment on the suitability of the product for the fire door (the fire door manufacturer will dictate the fire requirements of the ironmongery), as far as fitting it the dimensions are as follows:
Face of the lock (the width of the plate that shows in the edge of the door once fitted) is approx. 26mm
The body of the lock assembly (the part that fits inside the door) is approx 20mm.
Products We Recommend
Product Enquiry Form
Pay in 4 interest-free payments of £6.6675
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
