Product Summary MATERIAL Hardwood CORE CONSTRUCTION Engineered Core JOINT CONSTRUCTION
Mortice & Tenon
DOOR THICKNESS
44mm
FINISH
Unfinished
GLAZING
n/a
TRIMMING
Each side may be trimmed equally
up to a maximum of 6mm
Hardwood exterior door boarded on both sides. 44mm thick with solid hardwood lippings and thick hardwood face veneer.
Click here to view our door finish and care guidelines
30" x 78" (762mm x 1981mm x 44mm)
32" x 80" (813mm x 2032mm x 44mm)
33" x 78" (838mm x 1981mm x 44mm)
36" x 78" (915mm x 1981mm x 44mm)
Technical Information
Please click here to view manufacturers door care and maintenance guide
NOT SUITABLE FOR EXPOSED LOCATIONS - engineered external doors must be protected from direct sun and rain. This is achieved by a porch, canopy or recess of ideally 1.5 metres. If this precaution is not observed the performance of the door will not be satisfactory and any guarantee will be surrendered. In addition to finishing and sealing as above please be aware of the following.
1) We recommend a minimum of 3 coats of a suitable finishing product be applied to fully seal a door or frame
2) We recommend the fitting (externally) of a weather bar at the bottom of the door
3) Try to avoid painting a door black (or very dark) as dark colours absorb heat making the product very hot which can lead to cracking or excessive shrinkage
4) With external oak doors please ensure that the sealant contains a UV protection element. WARNING ��� If what you are applying is clear it will probably not contain UV protection. Check with your finishing supplier before purchasing
Supplied unfinished
CONSTRUCTION: Engineered construction and are made from component parts that are aimed at improving the performance of the finished article.
TREATMENT AND STORAGE: The door must be stored dry and flat. The door must be treated prior to hanging. It is most important that top and bottom edges are fully treated before the door is hung. Both faces and all four edges as well as any "cut outs" and the end grain must be also fully treated.
TRIMMING: With a door lipping of 10mm, each side may be trimmed equally up to a maximum of 6mm
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
Pay in 4 interest-free payments of £249999999.75
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
