High quality flush oak effect painted face with dark feature grooves Horizontal grooves to achieve a five panelled effect Light oak grained four coat painted finish Finished with hard wearing paint varnish Contemporary flush horizontal grooved design 6mm concealed edge ...Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreFully pre-finished with a clear lacquer finishing product.
Material composition: Engineered cores are manufactured from reconstituted wood such as chipboard, blockboard, plywood or MDF. Each of these raw materials can be used in different ways to make up the core component parts of a variety of doors. They are more stable in use than solid timber within the modern built environment.
Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions.
Storage: When receiving door it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work.
Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water based finishers, using only good quality solvent based finishers. Danish oil is not suitable for use on any of our doors.
FSC certified
MATERIAL: Engineered Timber Components
CORE CONSTRUCTION: Hollow core
DOOR THICKNESS: 35mm
FINISH: Pre-finished with a painted oak varnish effect
GLAZING: n/a
TRIMMING: 6mm per side
Question:
Hi what is the weight of the door ? Thanks
Answer:
11kg approx.
Question:
what is the thicknes of these doors. One place states 44mm and underneath says 35mm
Answer:
These doors are 35mm thick. I am having the listing changed to relfect this.
Question:
do you do this door in a smaller size as my bathroom door is 1830mm+610mm and my other 3 doors upstairs are 1981mm+762mm I trying to get all 4 doors the same style but the bathroom door is proving very difficult due to its size thank you
Answer:
The door height of 1830mm is too much for any of our standard door heights to be trimmed down to. However we may be able to offer this door in the exact size that you need as a bespoke order. Please contact a member of our sales team and we will be able to look into this for you.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
