The Bostonian contemporary 6 panel design is fully finished and ready to hang. Contemporary 6 panel design Woodgrain textured finish Pre-painted ready to hang, saving you time at home on finishing. Traditional and contemporary design option available Bi-fold, glazed and... Read More
The Bostonian contemporary 6 panel design is fully finished and ready to hang.
Please note: Create a door pair when you purchase the Jeld-Wen pair maker along with these doors - Pair makers allow you to put two doors together to created a pair, perfect to create a statement feature in bigger spaces.
Width: 926mm
Height: 2040mm
Thickness: 40mm
Material composition: The standard core is hollow with one lock block to one side of the door for lock or latch fixing. This product is generally used in domestic situations. The weight is approximately 13kg.
Installation: Internal doors should not be installed in areas with recent plastered, screeded or wet sites. All of our doors including those pre-finished, should not be exposed to inappropriate damp site conditions.
Trimming: There is a 4mm trim option along the two long edges, 6mm on the bottom edge and no trim allowance on the top edge. All doors are supplied with unfinished edges.
Storage: When receiving door, it should be laid flat fully supported off the floor in a dry and fully ventilated area with protective packaging intact. Doors supplied unfinished should be thoroughly sealed on all faces and edges prior to any installation work.
Finishers: Be sure to select a finisher with a lasting seal between component parts. Please avoid water-based finishers, using only good quality solvent-based finishers. Danish oil is not suitable for use on any of our doors. It is essential that the door is completely finished on the two faces and all four edges plus any cut-outs for locks, handles and hinges etc. Prior to finishing or sealing, lightly sand any handling marks. Usually 3 top coats are satisfactory, but we strongly recommend you that you treat this door in accordance with the paint manufacturer’s instructions. A light sanding between coats will provide the best finish. Adequate drying time must be allowed between each coat. Failure to seal the doors accordingly will invalidate any claims.
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
