Crown Cut Oak cross directional veneered faces with “double” V groove feature on each stile; the door has an open pore clear satin lacquer finish. The 35mm doors have a semi-solid construction and 10mm solid oak lipping. Pre-Finished - ready to install V Groov... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreCrown Cut Oak cross directional veneered faces with “double” V groove feature on each stile; the door has an open pore clear satin lacquer finish.
The 35mm doors have a semi-solid construction and 10mm solid oak lipping.
Sizes available
1981 x 457mm x 35mm
1981 x 533mm x 35mm
1981 x 610mm x 35mm
1981 x 686mm x 35mm
1981 x 762mm x 35mm
1981 x 838mm x 35mm
2032 x 813mm x 35mm
If a door needs to be trimmed it must be reduced equally from both sides. Each side of a door may be trimmed up to a maximum of 6mm for doors with a lipping 10mm or more, and 3mm for doors with a 6mm lipping. Please note any trimming over the 6mm overall for the fire doors will invalidate the FD30 rating.
We recommend the use of 3 hinges to offer more rigidity and strength
Untreated products must be fully sealed prior to hanging – this applies to all surfaces including tops, bottoms and all recesses cut for hinges, locks, handles and letter plates etc. Waxes and oils are not considered suitable for sealing a door and if used will invalidate any guarantee should the door subsequently fail.
There are no product downloads to show.
Question:
Hi, Is the door grooved or has it an in laid bead creating the lines of symmetry. i am looking for a door with an in laid dark bead .
Answer:
These Doors are supplied grooved
Products We Recommend
Product Enquiry Form
Pay in 4 interest-free payments of £36.25
Learn more