These doors are supplied factory rebated RHPO (Right hand push open when facing the doors). Due to the likelihood that these doors will be hung in an exposed location without the protection of a porch or canopy, it is essential that all edges, faces and cut outs are fully seal... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreThese doors are supplied factory rebated RHPO (Right hand push open when facing the doors). Due to the likelihood that these doors will be hung in an exposed location without the protection of a porch or canopy, it is essential that all edges, faces and cut outs are fully sealed prior to installation and that regular maintenance is undertaken. If this precaution is not observed, the performance and appearance of the doors will not be satisfactory.
Sizes available
1981 x 915 x 44mm
1981 x 1067 x 44mm
1981 x 1168 x 44mm
1981 x 1220 x 44mm
1981 x 1372 x 44mm
1981 x 1524 x 44mm
If a door needs to be trimmed it must be reduced equally from both sides. Each side of a door may be trimmed up to a maximum of 6mm for doors with a lipping 10mm or more, and 3mm for doors with a 6mm lipping. Please note any trimming over the 6mm overall for the fire doors will invalidate the FD30 rating.
We recommend the use of 3 hinges to offer more rigidity and strength.
Untreated products must be fully sealed prior to hanging – this applies to all surfaces including tops, bottoms and all recesses cut for hinges, locks, handles and letter plates etc. Waxes and oils are not considered suitable for sealing a door and if used will invalidate any guarantee should the door subsequently fail.
There are no product downloads to show.
Question:
can these door be made of solid hardwood ( oak ) and to my size. Please.
Answer:
Unfortunately we do not offer these in a bespoke size, we do however stock these in Oak also, here is a link:
https://www.doorsuperstore.co.uk/product/mendes-oak-french-pattern-20-external-door-pair-1524mm-dpoau50eg20.html
Question:
What is thickest glazing that can be fitted to these doors?
Answer:
These doors are suitable for glazing up to 14mm thick.
Question:
can you recommend a frame kit for the 54" x 78" version? i can't find a compatible one on your site
Answer:
Mendes External Large 2.8m Door Oak Un-finished Frame Kit
Question:
Do the doors come with the beading?
Answer:
they would come with loose beading so they can fit it after the glazing is installed
Question:
if double-glazed and properly framed, would these doors be up to building regs for entry doors to conservatory from house ? please email in reply
Answer:
Yes, as long as they are fitted correctly and have the relevant and appropriate glazing.
Question:
Looking to replace existing timber French doors (1200x1825) . Do you have a suitable product ? Regards
Answer:
Unfortunately, these doors are only supplied in the standard 1981mm height and it would not be possible to trim to 1825mm without voiding the warranty as well as potentially damaging the doors.
Question:
Can these doors be fitted with double or triple glazing
Answer:
These Doors accommodate double glazing
Question:
HI there can you tell me the size of glazing for these? I have existing doors which have rotted but the glass is fine, I think these are the doors that were used but I need to know if my glass will fit them.
Answer:
The manufacturers can advise approximate glazing dimensions – Please contact us via sales@doorsuperstore.co.uk to request drawings.
Question:
How much can these doors be shortened in height? Many thanks
Answer:
These doors can be shortened by 6mm on each outer edge.
Question:
Are these doors rebated?
Answer:
These doors are supplied rebated.
Question:
What is the suitable frame for these and can they be glazed?
Answer:
We offer a cut to size frame under code FROA90RW
The doors are supplied unglazed so you would need a local glazer to provide these once you have the doors on site and measured.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more