This door has a 40mm frame with 18mm boarding and 22mm bracing; the construction is solid laminated timber with 2mm crown cut rustic oak veneer and 20mm solid oak lippings. Because of the traditional design of this door no guarantee against movement can be offered. Supplied... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreThis door has a 40mm frame with 18mm boarding and 22mm bracing; the construction is solid laminated timber with 2mm crown cut rustic oak veneer and 20mm solid oak lippings. Because of the traditional design of this door no guarantee against movement can be offered.
Sizes available
1981 x 610mm x 40mm
1981 x 686mm x 40mm
1981 x 762mm x 40mm
1981 x 838mm x 40mm
If a door needs to be trimmed it must be reduced equally from both sides. Each side of a door may be trimmed up to a maximum of 6mm for doors with a lipping 10mm or more, and 3mm for doors with a 6mm lipping. Please note any trimming over the 6mm overall for the fire doors will invalidate the FD30 rating.
We recommend the use of 3 hinges to offer more rigidity and strength.
Untreated products must be fully sealed prior to hanging – this applies to all surfaces including tops, bottoms and all recesses cut for hinges, locks, handles and letter plates etc. Waxes and oils are not considered suitable for sealing a door and if used will invalidate any guarantee should the door subsequently fail.
Please note that the traditional design of these doors will often lead to movement within the product. This likelihood is minimised by thorough sealing (not wax) of every surface including tops and bottoms, and by hanging on 3 substantial hinges. It is of course a given that installation is only undertaken after the atmosphere is fully stabilised and dry.
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more