XL Joinery Pot of External Oak Door End Grain Sealer (250ml)

Name: XL Joinery Pot of External Oak Door End Grain Sealer (250ml)
Brand: XL Joinery
SKU: OSKIT-SEALER
Price: 60.48 GBP
Availability: Discontinued

OFFER

Code:

OSKIT-SEALER

Brand:

XL Joinery

To guarantee the look and long term performance of an external oak doors then use a quality finishing end grain sealer designed for the XL Joinery external oak door collection. Specifications Type: External oak door end grain finishing sealerSize: 250ml pot Dimens...Read More

View full product details

View questions about this product

Create a wishlist

Alan Milne

Description

To guarantee the look and long term performance of an external oak doors then use a quality finishing end grain sealer designed for the XL Joinery external oak door collection.

Specifications

Type: External oak door end grain finishing sealer
Size: 250ml pot

Dimensions

Pot Diameter: 72mm
Pot Height: 103mm

Technical Information

Please refer to the instructions included with the kit and the information on each tin prior to staining each door

We recommend using TWO COATS of end grain sealer on the designated area per door

Important:

When using this end grain sealer in conjunction with top coat and base coat (must be compatible XL Joinery branded pots), please refer to the coating schedule below for the correct order (applicable part in bold):

Apply ONE coat of XL Joinery base coat to all faces and edges including the top and bottom edges of the doors, allowing at least 4 hours drying time between coats.
Apply TWO coats of XL Joinery end grain sealer to the top and bottom edges of the doors, allowing at least 2 hours drying time before applying the second coat of end grain sealer and subsequent re-coating
Apply TWO coats of XL Joinery top coat to all faces and edges including the top and bottom edges of the doors, allowing at least 4 hours drying time between coats
Ensure that all lock, letterbox and hinge cut-outs are also finished to the same degree as the timber surface

Finishing:

Consult the Material Safety Data Sheet before use
Stir product well before use
Check colour
Apply according to the Technical Data Sheet with reference to the coasting instructions
Always use appropriate safety equipment

General Instructions:

Coatings should not be applied if the treatment is 10C or below, or in damp or rainy conditions. Drying times will vary according to environmental conditions
Lightly sand the substrate to achieve a key (P240 grit abrasive recommended). Round off any sharp edges to a 2-3mm radius. Always sand along the grain and remove any rust prior to painting
Prior to any coating of your joinery please ensure that all substrates are clean and dry
Stir the finish well prior to use then apply coats with a quality synthetic fibre brush, working along the grain and re-loading the brush at regular intervals to ensure sufficient build
Ensure all lock, letterbox and hinge cut outs are also finished to the same film thickness and number of coats as the timber surfaces.
It is important to apply the full coating schedule (base coat, top coat and end sealer) to your door before final installation and exposure to elements
Denib between coats using a fine grade P240 grit abrasive paper ensuring you do not break the surface of the coating system. Remove all dust before applying the next coat.

Maintenance

To ensure long life and appearance of the door, all coatings should be washed down annually to remove any surface pollution and check the finishing treatment and touch up as necessary. Full retreat the door every few years or as required, depending on degree of exposure. Door located in exposed areas will require more frequent maintenance coats.